Club Arnage

Club Arnage => Help => Topic started by: Lord Pig-Pen on September 24, 2008, 12:34:55 am



Title: Vectra wiring for stereo... help!
Post by: Lord Pig-Pen on September 24, 2008, 12:34:55 am
Folks...
Does anyone have a wiring diagram for a 2000 vecky V6 that shows the stereo wiring?
The last owner of Pig Pen Racing's new flagship vehicle has left me with a bundle of multi coloured wires that will take hours to sort through.
Live, earth, mute, phone etc are all normal colours but the speaker wires are baffling.
Can anyone shed any light for me please?

PP

PS Music will stop me enjoying the exhaust noise and save my liscence!


Title: Re: Vectra wiring for stereo... help!
Post by: mike(liverpool boys) on September 24, 2008, 09:06:56 am
I could'nt be any further from experienced at this but would checking what colours the wires are at all the speakers and tracing them back to the head unit shed any light on the problem???

Mike


Title: Re: Vectra wiring for stereo... help!
Post by: Lord Pig-Pen on September 24, 2008, 02:46:42 pm
It would, but I really dont want to have to take all the door cards off... being a Vauxhall I'm sure that things will break and it will be a pig to get back together.


Title: Re: Vectra wiring for stereo... help!
Post by: nickliv on September 24, 2008, 02:58:24 pm
Not quite right Rex.

Being a vauxhall, the door cards will just fall off by themselves. Take it up and down the track a few times.

Isn't there a nice pluggy thing for the back of the stereo, so if you're putting an aftermarket HU in, you can often get a nice all in one connector http://www.nexxia.co.uk/Car_Stereo_fitting_kits/vauxhall/vectra.htm (http://www.nexxia.co.uk/Car_Stereo_fitting_kits/vauxhall/vectra.htm) (Just a suggestion) that patches straight into the loom, or does it look like the previous HU was erm, forcibly removed by someone other than the rightful owner.

The days of chocolate block behind dashoards are largely brhind us I fear.


Title: Re: Vectra wiring for stereo... help!
Post by: mike(liverpool boys) on September 24, 2008, 03:07:12 pm
If the iso cable (pluggy thingy)  ;D is missing nip down the scrappy and whip one out of another veccy and just join the cables with small choc blocks or black tape. I did this wit an old clio for a quick fix.

Mike


Title: Re: Vectra wiring for stereo... help!
Post by: Nordic on September 24, 2008, 03:13:12 pm
If you have an old spare speaker experiment with that, if it all goes pete tong then you will know which way round not to do it!

(I should point out I have no knowledge on car wiring whatsoever!)

try here for a better reply.
http://www.honestjohn.co.uk/index.htm





Title: Re: Vectra wiring for stereo... help!
Post by: Jules G on September 24, 2008, 06:05:51 pm
I'm sure young Kev will have an opinion >:D

Calling Kev, Where are you................


Title: Re: Vectra wiring for stereo... help!
Post by: Lorry on September 24, 2008, 10:54:09 pm
Strangely, normal Vauxhall owners use the web.

My first search found exactly the same question on a forum, with the helpfull answer "I have the same problem" 

However this looks a little more promising http://www.vauxhallownersnetwork.co.uk/showthread.php?t=2514
but you'll have to find the "How to " section.  It suggests that they're all on the standard plug, which has standard colours for the wires


Title: Re: Vectra wiring for stereo... help!
Post by: Kev_mk3 on September 27, 2008, 12:59:30 am
I'm sure young Kev will have an opinion >:D

Calling Kev, Where are you................
im here. Rex if its a after market unit you will need a audio leads adaptor from halfords or ebay. plug and play then :)


Title: Re: Vectra wiring for stereo... help!
Post by: Lord Pig-Pen on September 27, 2008, 02:52:48 am
If the iso cable (pluggy thingy)  ;D is missing nip down the scrappy and whip one out of another veccy and just join the cables with small choc blocks or black tape. I did this wit an old clio for a quick fix.

Mike
I think I may have been a bit thick here.... Derrr ;D
I am on the case tomorrow....
So much for us forest boys being smart..... what about the crossovers that run the seperate bass mid and tweeters?
 ;)


Title: Re: Vectra wiring for stereo... help!
Post by: mike(liverpool boys) on September 27, 2008, 06:24:28 pm
As far as i know any crossovers should be in beside the speakers and as long as the cables have only been chopped at the iso plug everything should be fine once a plug is fitted. As kev said though,if its an aftermarket head unit your going for you will need an iso adaptor from autoleads or the like to convert the standard veccy plug to fit a new head unit  ;)

Mike


Title: Re: Vectra wiring for stereo... help!
Post by: Lord Pig-Pen on October 13, 2008, 12:06:51 am
All sorted for £3. Cheers.
PP


Title: Re: Vectra wiring for stereo... help!
Post by: Lord Pig-Pen on October 13, 2008, 09:25:32 pm
Finally up and running. Sounds great even with the factory speakers... now where is that amp and sub I have in the barn.... >:D


Title: Re: Vectra wiring for stereo... help!
Post by: Andy on October 16, 2008, 12:01:28 am
Bloody hell Rex, had the car 10mins now you what to increase the BHP with an amp.

Be sure to ensure te handrake up to the job so you don't boom off the traffic lights!!