Hello,
Since many of us are going to either Sebring or Le Mans or both, and we are pretty much going to be supporting the Aston Martin team at these events, I decided to work on a T shirt design for these races.
I have now finalized the designs, and have posted a low res version of them below. I have e mailed the full size designs to Jpchenet, who is hopefully going to host them online somewhere so that all Club Arnage members have access to down load the full size images.
The designs have by made so that the proportions are to fit an A4 size sheet of iron on transfer film. This film is available at PC World for about £10 for 5 sheets, or from Computer Fairs for about £4 for 5 sheets.
Asda sells packs of 2 good quality plain t shirts for £3.50p
I have done three seperate sheet designs, so there is a choice of two designs.
Design 1 uses a single sheet of transfer film for the front and a single sheet for the back print.
Design 2 again uses a single sheet for the back print, but uses the CA logo and Aston logo from the single front sheet, along with the larger car from the second front sheet at the bottom. There is then an extra CA logo and Aston logo left over from the second front sheet, which can then be ironed onto each shoulder of the t shirt.
These are the low res designs, along with a basic sketch of how to lay the designs out on the t shirt, depending on whether you choose the 2 or 3 sheet options.
You should be able to make 4 t shirts with the 3 sheet design, for approximately £19.00p and about an hour using the iron. Thats not bad at £4.75p a shirt now is it.
Go on show your support for Aston Martin at the races this year ?
